lawn with brown patches

Physical exclusion is the most reliable way to protect shrubs from deer in winter. Use fencing at least eight feet tall or wire cages around individual plants. Repellents help when reapplied regularly, but none stop all damage. For long-term results, choose deer-resistant natives like bayberry, summersweet, and eastern red cedar.

Deer damage in Connecticut peaks when food runs short. A row of arborvitae that looked full in November can be stripped to bare trunks by March.

Fall is the time to act. Protection works best when it goes up before deer establish a winter feeding pattern in your yard.

Why Deer Damage Peaks in Winter

UConn Extension’s guide to preventing deer damage explains that deer visit residential areas most often in winter, when forest food is scarce. They return in spring when new growth is tender.

Late winter is often the worst stretch. In a local column for Zip06, Old Saybrook landscape designer Kathy Connolly noted that animals become very determined in late winter. Most other food sources are exhausted by then.

Acorn Years Matter

Connecticut Agricultural Experiment Station wildlife biologist Scott Williams told Connolly that damage tends to rise in non-mast years. In those years, oaks produce few acorns. Deer then turn to landscape plants.

Which Shrubs Deer Target

Deer favor certain plants heavily. The Connecticut Agricultural Experiment Station lists tulips, hostas, rhododendrons, and yews among their favorites. UConn adds arborvitae to the most-browsed list.

Evergreens suffer most in winter because they are among the few green plants available. Deer also prefer lush, well-watered, well-fertilized plants. UConn notes that deer will eat almost anything when preferred foods run out.

Fencing: The Most Effective Option

Physical exclusion is the most reliable way to prevent deer damage. The CAES fact sheet on controlling deer damage names fencing as the most effective method for gardens.

UConn Extension sets clear specifications for deer fencing:

  • At least 8 feet tall, since deer jump well
  • Openings no larger than 6 by 6 inches
  • Reaching all the way to the ground so deer cannot push underneath

Full-perimeter fencing is not practical for every property. Fencing a high-value bed or vegetable garden is often a good compromise.

Protect Individual Plants

For smaller areas, protect plants one at a time. UConn recommends wire-mesh cylinders around young trees and shrubs. These cages discourage both browsing and antler rubbing, which strips bark from young trunks.

Burlap screens and deer netting can shield individual evergreens through winter. Remove them in spring once new growth begins and natural food returns.

Using Deer Repellents

Repellents discourage feeding through bad taste or odor. They are a useful layer of protection, but they have limits.

A Connecticut study of deer repellents tested 10 commercial products on yews at two sites. Repellents that required more frequent application generally performed better. None prevented all browse damage, and several performed no better than untreated plants.

How to Get the Most From Repellents

UConn Extension recommends these practices:

  • Cover plants from the ground up to at least six feet, the height deer can reach
  • Reapply after rain and whenever new growth appears
  • Start before damage begins, so deer never form a feeding habit

The CAES fact sheet notes that egg-based and soap-based repellents are widely available at garden stores. Read labels carefully, especially near edible plants or water.

Other Deterrents

UConn suggests some low-cost tactics that can help:

  • Fishing line strung around specimen plants confuses and pushes away deer.
  • Motion-activated sprinklers, lights, or noise can startle deer.
  • Less fertilizer in areas deer visit makes plants less appealing.

Scare devices usually work only briefly. UConn notes that deer quickly get used to devices that never move or change. Relocate them often to keep deer wary.

CAES also advises against feeding deer or putting out salt licks. Feeding draws deer in, and they will eat both the feed and your plants.

Plant Deer-Resistant Natives

Long-term deer management starts with plant selection. UConn Extension calls this the most important step in preventing landscape damage. No plant is completely deer-proof, but some are rarely eaten.

Deer generally avoid plants with thorns, strong scents, bitter flavors, toxic sap, or fuzzy leaves. Ornamental grasses and ferns are nearly all highly resistant, according to UConn.

Native Shrubs and Trees Deer Usually Avoid

UConn’s deer-resistant list includes several natives well suited to shoreline Connecticut:

  • Northern bayberry (Morella pensylvanica)
  • Red chokeberry (Aronia arbutifolia)
  • Eastern red cedar (Juniperus virginiana)
  • Summersweet (Clethra alnifolia)
  • Sweetfern (Comptonia peregrina)
  • Downy serviceberry (Amelanchier arborea)
  • Eastern white pine (Pinus strobus)
  • Sugar maple (Acer saccharum)

Several of these also tolerate salt spray, which makes them doubly useful near Long Island Sound.

Native Perennials Deer Usually Avoid

UConn lists wild ginger (Asarum canadense), fringed bleeding heart (Dicentra eximia), and Adam’s needle (Yucca filamentosa) among resistant perennials. Our guide to native groundcovers for shady yards covers more low-growing options.

Avoid Invasive “Deer-Proof” Plants

Some plants deer ignore are invasive. UConn names Japanese barberry and Oriental bittersweet as examples. Both take over forests and crowd out native plants that birds and butterflies depend on.

Design Your Yard in Deer Zones

UConn recommends dividing the landscape into zones. Place the most deer-resistant plants along the outer edges of the property. Keep plants deer love close to the house, near busy entrances, or inside fenced areas.

A thoughtful landscape design can combine deer resistance, salt tolerance, and native habitat in one plan.

Deer and Ticks

Deer also carry ticks that transmit Lyme disease, as UConn notes. Reducing deer traffic can be part of a broader tick strategy. Our guide to organic tick control in Connecticut covers habitat changes that help.

Frequently Asked Questions

What shrubs do deer not eat in Connecticut?

UConn lists northern bayberry, red chokeberry, summersweet, eastern red cedar, sweetfern, and boxwood among deer-resistant shrubs. No shrub is fully deer-proof. Hungry deer may still sample resistant plants in a hard winter.

Does burlap protect shrubs from deer?

Burlap screens and wraps can block deer from reaching foliage. They work best on smaller evergreens and need secure staking. Wire cages offer stronger protection for young trees.

How often should I apply deer repellent in winter?

Reapply after rain and whenever new growth appears. Research in Connecticut found that repellents applied more frequently generally worked better. Follow each product’s label for exact timing.

How tall does a deer fence need to be?

UConn Extension recommends at least eight feet. Openings should be no larger than six by six inches, and the fence must reach the ground.

Will arborvitae grow back after deer damage?

Arborvitae can regrow on branches that still have green foliage. Bare brown sections usually do not fill back in. Protect damaged plants this winter and give them a full season to recover before deciding to replace them.


This article provides general guidance for Connecticut homeowners. Always follow repellent label directions, and consult a landscape professional for plant recommendations specific to your property and deer pressure.

Facebook
Twitter
LinkedIn
Pinterest